• Buyer protection
    ?
  • Shipped within 1 business day!
    ?
  • Lowest product price
    ?
  • 14 days cooling-off period
    ?

250kg lock in/out drawer runners 12 inch = 300mm

€ 53 excl. VAT

In stock

Highlights:
BRASOM | SKU: BS2L-250-300 | EAN: 8721217102456
  • The price is per set = 2 pieces
  • With lock-in and lock-out locking function
  • Load capacity up to 250 kg per set, evenly distributed
  • The above is recommended for wall mounting!
  • Min 60% for Floor-mounted, bends and is susceptible to dirt!
  • 305 mm = 12″ installation length + 30 mm lock
  • Extends to its own length of 305 mm, so the total
  • Extended length is 610 mm + 30 mm lock
  • 76 mm wide – 19.5 (±0.4) mm thick
  • 3 kg net weight per set
  • Excluding mounting hardware
  • Left and right versions
  • Galvanized steel
  • Ball bearing
Read the instructions! Key points of attention:
  • From open: Unlock (and pull) before pushing closed!
  • Pushing/hanging in the locked open position is harmful!
  • Prevent wear by operating the levers throughout the entire stroke
  • Access the mounting holes through the hole in the middle profile
  • Do not move the upright guide; the ball cage will slip!
  • Do not use bolt heads >2mm internally
EAN: 8720648719356EAN: 8721217102456 SKU: BS2L-250-300 Categories: , ,
Description

Range drawer guide attachment?

This set of 250kg drawer guides can be mounted at a 90° angle to the bottom or ceiling using our floor brackets BS1B-UNI-1. These are not included as standard with the drawer guides and must be added separately to the shopping cart.

The brackets are designed in such a way that you have the choice of having the lip protrude from under the drawer or from the side of the drawer. The fasteners are compact, so that no threaded end protrudes on the outside. You can even attach two drawer runners to either side of one bracket. Ideal for multiple drawers next to each other in, for example, a camper or commercial vehicle! If you want multiple drawers on top of each other, you can easily and quickly achieve this with the help of these high brackets BS1B-UNI-3.

The floor brackets also contribute to the ease of use. Even professionals, who could also screw the drawer runners directly to the inner walls of a casing, choose our floor brackets for the following reason; Adjusting the drawer runners is, as you can read under the ‘Assembly’ heading, a difficult and precise job. The space between the casing and the drawer may deviate minimally from the regulations and the mounting position against both side walls must also be aligned with each other. It takes a lot of frustration and time to get this done. However, you can save this by using our floor brackets. You mount the drawer and the floor brackets to the runners and then place the whole thing in the casing. After sliding the drawer open and closed once, the runners are properly aligned with each other and all you have to do is screw the brackets to the bottom. Ideal!

Mounting a drawer or shelf?

You can screw or bolt the inner profile of the drawer runners directly to the side of a drawer. However, there are situations in which our aluminum drawer brackets BS1B-UNI-2 are desirable. These angle profiles support the drawer, which relieves the drawer wall and can therefore be made of a thinner material. You could even leave out the side walls, creating a pull-out tray between the guides. Apart from the extra options, the brackets also contribute to the adjustment. After all, you do not have to screw both guides to an identical height against a drawer wall. After mounting the brackets, you simply place the drawer on the brackets and screw it to them. It couldn’t be easier!

Open and closed position locking?

These Heavy Duty drawer runners have a locking function, which allows the drawer to be held securely in both the closed and open positions. This function is intended to prevent unwanted movements, for example in a commercial vehicle while driving, or for a pull-out kitchen unit in a camper.

We can supply these 250kg runners with or without a lock. If you use the standard heavy duty version, the drawer will fall open if it tilts downwards. If you choose the version with a lock, this is not possible. The drawer runners are secured in both the open and closed positions. The blue locks of this set of drawer runners are mirrored in relation to each other. This means that you do not have to push one lever up and one down to open the drawer, but both locks point in the same direction. It does not matter whether you mount the drawer runners with the locks facing up or down. Apart from these locks, the runners do not differ. There is no left or right variant.

How much weight can a drawer with these runners carry?

One set of these drawer runners can carry 250kg. This applies in both retracted and extended positions and if the weight is evenly distributed over the length. If the weight is only going to be placed deep in the drawer, these runners can carry approximately 115% = 285kg. The maximum point load at the front of the drawer is around 70% = 175kg. Don’t forget to include the drawer’s own weight in your weight calculation. If necessary, place partitions in the drawer to ensure that heavy contents cannot slide forward. This will benefit the drawer runners. You can also choose not to let the drawer runners extend as far as possible, but to stop the movement earlier. This limits the arm of the protruding weight, which means that the guides can handle a greater load compared to maximum extension.

Horizontal or vertical use of the drawer guides?

The previously mentioned loads apply if you use the drawer guides as standard (vertical), i.e. mount them against side walls. You can also attach the drawer guides flat (horizontally) under the drawer, but this does have a negative effect on the maximum load and the deflection. The maximum weight that can be carried decreases by 60% and the front of the drawer will deflect a few centimeters instead of millimeters when extended, assuming the same weight.

In addition, the drawer will not automatically lock into place when extended. This can still be done manually by pushing a hinged part in the drawer guide (just behind the extended drawer). Lock-IN will continue to function properly when flat.

But now an even bigger disadvantage that is often not considered. A flat-mounted drawer guide is very sensitive to dirt. When the drawer opens, the middle and largest profile is exposed as a kind of elongated and greased container. The ball cage between the middle and largest profile is also exposed to, for example, blowing sand. If it remains with some sand, these drawer runners with exceptionally large 8mm balls will continue to work, but the movement will not become smoother.

What does a drawer runner thickness of 19.1mm +0.8 mean?

The drawer runners must be placed without tension between the drawer and the cabinet. Tension occurs when the parts of the runners are pulled apart in the direction of thickness, or pressed together. In order to achieve a smooth movement, the distance between the drawer and the side walls of the cabinet must remain within the range of 19.1 to 19.9 mm. If the gap deviates from this, friction occurs, which results in a stiff operation of the runners. In addition to a smooth movement, the stability of the drawer is also important. The more space the runners have, the more unstable the drawer becomes. In other words: the closer the gap is to 19.1 mm, the more stable the drawer. An example of this is that a drawer with a gap of 19.8 mm will show more lateral movement (unwanted) when extended than with a gap of 19.2 mm. In both cases, the drawer moves smoothly. So we advertise 19.1 mm because, given both aspects, that is the ideal gap. The addition +0.8 / -0 indicates how much the size may deviate from that.

Additional information
Weight 3 kg
Dimensions 334,8 × 19,1 × 76 mm
Assembly

Mounting our 250kg drawer runners

Adjusting drawer runners is a tricky job. The runners must not be twisted in relation to each other. They must also not be under tension between the drawer and the casing. Tension occurs when the parts of the runners (in thickness direction) are pulled apart or pushed together. It is therefore important to make the space between the drawer and the side walls of the casing between the prescribed 19.1 and 19.9 mm for smooth movement. If the size deviates from this, the runners will experience friction and become stiff. In addition to the smoothness of the movement, stability is a related aspect. The more space you give the drawer runners, the more unstable the drawer becomes. In other words: The closer to the 19.1mm of space, the more stable the drawer. Example: A drawer with 19.8mm spaces will be able to move sideways more (unwanted) when extended than if the spaces were 19.1mm. In both cases, the drawer moves smoothly.

To achieve this adjustment as well as possible, I recommend that you only screw, glue or bolt one side wall of the casing (or drawer) when the drawer is attached in between. The side wall then still has the possibility to make a small sideways movement, if that is necessary for perfect adjustment. It is also important that both runners touch the backstop at the same time when the drawer is closed. The front sides of both runners must therefore be in line with each other. A hard bang when closing the drawer can be prevented by ensuring that the drawer runners reach the plastic backstops before the front of the drawer touches the casing. So keep a little space (+2mm) between the front of the drawer and the casing when closed. If your drawer is slightly longer than the length of the drawer runners, I recommend attaching the runners as far as possible towards the front of the drawer. This small detail means that the drawer can be loaded more heavily and will bend less than if you were to mount the runners deeper in the casing, i.e. further from the front of the drawer.

Lightweight drawer runners (not 250kg variants) can often be divided into two parts. In this way, you can easily screw one part of the drawer runner against the side of the drawer and the other part against the inner wall of the casing. You can then carefully slide the drawer into the casing, after which the guides will secure themselves again. This is not the case with these 250kg variants. These are designed for high loads and the option of dividing is not robust enough. You must first mount these guides against the inside of the casing. Then slide the guides out completely and mount the drawer in between. The mounting holes have a diameter of 7.6 mm on the casing side and 5.2 mm on the drawer side. Use bolts or screws with a low or countersunk head. If you choose the latter option, use a small thread diameter, so that the countersunk head partially falls into the hole. If you do not take this into account, it is possible that the heads will get in the way when moving the drawer. Before you start mounting, check whether the selected screw or bolt is sufficient.

Good luck!