What is a drawer divider for?
This divider can be added to our 620mm wide aluminum drawers. With one or more of these dividers you can divide the surface of the drawer into segments. This results in a drawer that is easier to organize. A divider also contributes to the lifespan of the drawer runners. A divider prevents heavy items from sliding around in the drawer. Deep in the drawer, the drawer runners can be loaded more heavily than against the front of the drawer, so if you prevent heavy items from sliding forward using a partition, this will improve the load-bearing capacity and deflection.
Custom drawer?
We can adjust our aluminium drawers to the dimensions you require. To do this, please provide the following information by email: Available installation depth, width and height | Number of drawers | Number of partitions
You will receive a customised quote from us within two working days. If you agree, it will take approximately 4 weeks before we can deliver the drawer(s).
Where should the drawer divider go?
The drawer divider can be attached across the entire depth of the drawer. It does not matter how many dividers you add to the drawer. These can also be easily moved later if a different layout is desired. You can even divide the drawers widthwise. If desired, you must ensure that two walls are 610 mm apart in depth direction. You can then divide that compartment widthwise using additional dividers. Ideal!
How to install a drawer divider?
The drawer divider is easy to install, using a Phillips screwdriver (not included). To start, place the T-connectors over both ends of the divider and loosely screw the threaded pins into the holes. Not too tight, because the T-connectors must still be able to move. If you are going to load the drawer with 100+ kilos, you can also consider using the floor connector. The floor connector is not strictly necessary for securing the divider, but it does contribute to the strength of the construction. In case of high load, the bottom of the drawer may bend slightly, which would prevent a bulkhead with floor connector.










