• Buyer protection
    ?
  • Shipped within 1 business day!
    ?
  • Lowest product price
    ?
  • 14 days cooling-off period
    ?

Aluminum drawer divider V09 for 622mm wide drawers

€ 26 excl. VAT

In stock
Highlights:
  • Price per drawer divider including mounting materials
  • Contains what is shown in the first photo
  • To be mounted on our 911 mm wide drawers
  • Can be mounted over the entire drawer depth
  • Multiple dividers possible per drawer
  • Dimensions of divider; 897 x 84 x 6 mm
  • Easy to attach using T-connectors
  • Floor connector provides support for high loads
  • 1.3 kg own weight per divider
  • Untreated blank 6 mm thick aluminium
EAN: 8721217102340 SKU: W608xH84 Category:
Description

What is a drawer divider for?

This divider can be added to our 622mm wide aluminum drawers. With one or more of these dividers you can divide the surface of the drawer into segments. This results in a drawer that is easier to organize. A divider also contributes to the lifespan of the drawer runners. A divider prevents heavy items from sliding around in the drawer. Deep in the drawer, the drawer runners can be loaded more heavily than against the front of the drawer, so if you prevent heavy items from sliding forward using a partition, this will improve the load-bearing capacity and deflection.

Custom drawer?

We can adjust our aluminium drawers to the dimensions you require. To do this, please provide the following information by email: Available installation depth, width and height | Number of drawers | Number of partitions

You will receive a customised quote from us within two working days. If you agree, it will take approximately 4 weeks before we can deliver the drawer(s).

Where should the drawer divider go?

The drawer divider can be attached across the entire depth of the drawer. It does not matter how many dividers you add to the drawer. These can also be easily moved later if a different layout is desired. You can even divide the drawers widthwise. If desired, you must ensure that two walls are at a certain distance from each other in the depth direction. You can then divide that compartment widthwise using additional dividers. Ideal!

How to install a drawer divider?

The drawer divider is easy to install, using a Phillips screwdriver (not included). To start, place the T-connectors over both ends of the divider and loosely screw the threaded pins into the holes. Not too tight, because the T-connectors must still be able to move. If you are going to load the drawer with 100+ kilos, you can also consider using the floor connector. The floor connector is not strictly necessary for securing the divider, but it does contribute to the strength of the construction. In case of high load, the bottom of the drawer may bend slightly, which would prevent a bulkhead with floor connector.

Additional information
Weight 0,9 kg
Dimensions 608 × 84 × 6 mm
Assembly

Mounting our aluminum drawers

The drawers are easy to mount to our drawer runners using the supplied fasteners. Slide out the runner to access its mounting holes. Then position the hole in front of the drawer and insert a sleeve nut through the hole from the drawer runner side. Then tighten a bolt into the sleeve nut from the drawer side until hand-tight. Tighten everything until all holes are fitted with fasteners and both drawer runners are positioned at the same distance from the front of the drawer.

Good luck!