• Buyer protection
    ?
  • Shipped within 1 business day!
    ?
  • Lowest product price
    ?
  • 14 days cooling-off period
    ?

80kg / 250kg drawer runner mounting for 9-11mm wall thickness (1pc. M5x14)

€ 1 excl. VAT

In stock
  • Buyer protection and free insurance
    ?
  • Ordered before 2pm, shipped the same day!
    ?
  • Free shipping from € 150
    ?
  • 14 days reflection period
    ?
Highlights:
  • Price per set; one bolt and one nut.
  • Type; M5 x 14 mm galvanized low-head bolt + M5 stainless steel sleeve nut
  • For mounting 80 and 200 kg conductors against 9-11 mm thick side wall
Services:
  • 2% discount from €1000
    ?
EAN: 8721217101343 SKU: BS-M5x14 Categories: , ,
Description

What can these sleeve nuts be used for?

With these fasteners, you can neatly attach our 80 and 250 kg drawer runners to a side wall or drawer. Please note that you must be able to reach the back of the side wall to tighten the bolt or to hold the sleeve nut. This is therefore not a blind attachment.

Because the sleeve of the nut also partly falls into the hole to be drilled (in the side wall), you need holes with a diameter of 6.5 mm.

In most cases, it does not matter whether you insert the bolt or the sleeve nut from the inside through the drawer runners. You can even mount drawer runners on both sides of a wall with one bolt and nut attachment. An exception to this is mounting our 80kg runners against the inner wall of a casing. In this case, it is recommended to place the sleeve nut on the inside of the runner and the bolt on the outside of the casing.

Also keep in mind that, with runners with a lock, it is better to leave certain holes in the largest drawer runner slide (casing side) empty. An internal part of the lock passes by there very closely. Before mounting, check which holes this is the case for. You do this by moving the runner open and closed and simultaneously looking through the holes to see if something moves past it at a certain moment. If you use our mounting brackets, you do not have to take this into account. The hole pattern in the brackets is adjusted to this.

BRASOM Ladeleiders helps you further!

It is quite possible that some things are still unclear or that you have a specific question for a situation. Our customer service is happy to assist you and will do everything they can to help you as best they can.

What length of bolts should I order?

The length of the bolts to be ordered depends on the thickness of the side wall to which the guides are to be bolted. If you position the bolt head on the inside of the drawer runner and the sleeve nut on the outside of the wall, it does not matter if the bolt is longer than indicated below. The thread of the bolt will then protrude on the outside. Shorter will of course not work. If you adhere to the specifications below, you can also position the bolt head on the outside of the wall. A bolt head looks neater than a sleeve nut.

Read the following!

Sometimes we are called by a concerned customer who indicates that a lip of an 80kg drawer runner is touching a sleeve nut during sliding in and out. The customer has then inserted the sleeve nut from the inside through the hole in the drawer runner and is testing the movement by hand or flat on a table. It is true that in that case an internal part of the drawer runner can touch the sleeve nut. After all, the drawer runner is, as it were, pressed together by the method of testing. The drawer runner thickness is therefore significantly less than the prescribed 19.1mm, which can cause a collision with an (untightened) sleeve nut. So don’t worry; you will see that this will not happen after installation!

How many fasteners do I need?

The number of fasteners depends on the load and the length of the drawer runners. If we make 250kg drawers, we use the following per connection:

  • 300-750mm length = 3 mounting points
  • 800-1,350mm length = 4 mounting points
  • 1,400-2,000mm length = 5 mounting points

You can also use these numbers for 80kg drawer runners and they apply to both the casing and the drawer side. Please note that this is per drawer runner. Some examples for clarification:

  1. You want to mount one set of 80kg-750mm drawer runners using these fasteners against both the drawer and the casing. You will then need 4 connections and: 4 x 3 pieces = 12 fasteners. It is often wise to add one extra in case you drop a nut and can’t find it.
  2. You want to mount one 250kg-1600mm drawer runner to a side wall with these bolts and nuts and attach the other drawer runner to the bottom using our right-angled mounting bracket. You want to connect the drawer to the drawer runners using screws that you arrange yourself. You will then need: Half a set of mounting brackets and 1 x 5 loose bolts and nuts to attach the drawer runner to the side wall. The mounting bracket already includes bolts and nuts to connect the bracket to the other drawer runner. So you don’t need to add any separately. Fasteners to connect the bracket to the surface are not included. For this example, you only need half a set of mounting brackets, apart from the 5 loose bolts and nuts. You can halve a whole set after adding it to the shopping cart by pressing the minus sign.
Additional information
Weight 0,002 kg
Dimensions 14 × 10 × 10 mm